| 汽车刹车片背板冲压加工与模具设计 |
| |
| 引用本文： | 张社就,杨晓红. 汽车刹车片背板冲压加工与模具设计[J]. 锻压装备与制造技术, 2007, 42(5): 74-76 |
| |
| 作者姓名： | 张社就 杨晓红 |
| |
| 作者单位： | 广东水利电力职业技术学院,广东,广州,510635;广东水利电力职业技术学院,广东,广州,510635 |
| |
| 摘 要： | 汽车刹车片背板是汽车上易损零件，生产批量大。零件厚5mm，精度要求很高，大多采用精冲工艺生产。本文通过对汽车刹车片背板的工艺分析，采用普通冲孔落料、斜面成形和修整等工序）中压生产，并设计了相应各工序的模具，在模具结构设计中解决了诸如零件定位、圆弧斜面定位和模具偏载等问题，最终生产出了满足要求的零件。实践证明：背板生产工艺可靠，质量稳定。解决了用普通冲压工艺和设备生产精冲零件的问题，提高了企业的经济效益。
|
| 关 键 词： | 机械制造 冲压加工 刹车片背板 模具 |
| 文章编号： | 1672-0121（2007）05-0074-02 |
| 修稿时间： | 2007-06-26 |
Fine Blanking Technology & Die Design for the Back Plate of Brake |
| |
| ZHANG Shejiu,YANG Xiaohong. Fine Blanking Technology & Die Design for the Back Plate of Brake[J]. China Metalforming Equipment & Manufacturing Technology, 2007, 42(5): 74-76 |
| |
| Authors: | ZHANG Shejiu YANG Xiaohong |
| |
| Affiliation: | Guangdong Technical College of Water Resources and Electric Engineering, Guangzhou 510635, Guangdong China |
| |
| Abstract: | Various blanking and forming dies using in different procedures have been designed by using common blanking procedure ,bevel forming procedure ,finishing blanking procedure based on the analysis of the stamping technology for the back plate of brake.Ultimately, the qualified parts have been manufactured after solving the problems of part position and rotundity bevel position and asymmetric loading on the dies.The result indicates that the stamping technology to produce the back plate of brake described in this paper is reliable and steady and the fine blanking technology could be replaced by common blanking procedures.The good economic performance has been gained and product equipments in the corporation have been simplified. |
| |
| Keywords: | Blanking technology Back plate of brake Die |
| 本文献已被 维普 万方数据 等数据库收录！ |
