Laboratory RO and NF processes fouling investigation by residence time distribution curves examination

The fouling phenomena of nanofiltration of calcium sulfate saturated feed solution in the presence of magnesium and carbonates as well as the reverse osmosis of saturated silica feedwater with magnesium chloride content at different pH levels, was investigated by analyzing the membrane residence time distribution curves (RTD) in our laboratory. The fraction of degraded membrane (parameter a), the fraction of active membrane area (parameter b) and the fraction of membrane blocked by impermeable layer (parameter c) as a function of permeate recovery was determined. It was found that not only surface blockage affects permeate efficiency, but also other factors, such as module retentate chamber pressure drop and osmotic pressure increase. The membranes RTD measurements as well as fouling, a, b and c parameters, gathered with ion-selective electrodes (chloride, calcium and cupric ion-selective) and appropriate tracer solutions (sodium chloride, calcium chloride and cupric nitrate) were compared with commonly used conductivity sensor and sodium chloride tracer solution. We found that both the tracer and detector type strongly affects membrane mean residence time and its variance, but at the same time no influence of detector and tracer type on membrane fouling a, b and c parameters was observed.