| 小口径炮弹铜弹带自动焊接技术 |
| |
| 引用本文： | 舒泽胜,余海勇.小口径炮弹铜弹带自动焊接技术[J].四川兵工学报,2013(3):53-55. |
| |
| 作者姓名： | 舒泽胜 余海勇 |
| |
| 作者单位： | 中国兵器工业第五八研究所 |
| |
| 摘 要： | 目前国内大多数小口径炮弹的铜弹带均采取在弹体上压制而成,这种方式存在2方面的弊端:一是弹带与弹体结合效果不好,弹带在射击时容易脱落;二是工序复杂,生产效率较低。针对该弊端,研究采用自动氩弧焊焊接形成铜弹带,然后毛坯经过加工成型而实现装配的一种新型技术,从而解决目前小口径炮弹在生产工艺中存在的严重缺陷。
|
| 关 键 词： | 小口径炮弹 铜弹带 氩弧焊 焊接成型 |
Automatic Welding for Shell Coppery Belt of Small-Caliber Cartridges |
| |
| Authors: | SHU Ze-sheng YU Hai-yong |
| |
| Affiliation: | (No.58 Research Institute of China Ordnance Industry,Mianyang 621000,China) |
| |
| Abstract: | At present, coppery belts adopted in most small-caliber cartridges are pressed on cartridge bodies. This method possesses two shortcomings, one is the linkage between belt and cartridge body show bad effect, and the other is complex process and low productive efficiency. Therefore, research on a new technology： first form a coppery belt through automated argon arc welding, then process and mould the roughcast, finally realize assembly. This new kind of technology could solve major problems existed in the process of small-caliber cartridge productions at nresent. |
| |
| Keywords: | small-caliber cartridges coppery belts argon arc welding welding |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
