| LF6铝合金散热器振动钎焊润湿界面微观组织特征 |
| |
| 引用本文： | 余克壮,彭勃,范民,许志武,闫久春.LF6铝合金散热器振动钎焊润湿界面微观组织特征[J].机械制造文摘-焊接分册,2011(3). |
| |
| 作者姓名： | 余克壮 彭勃 范民 许志武 闫久春 |
| |
| 作者单位： | 中国电子科技集团公司第二十九研究所;先进焊接与连接国家重点实验室哈尔滨工业大学; |
| |
| 摘 要： | 研究了LF6铝合金散热器模拟件非真空条件下的振动钎焊,重点考查了振动作用对钎料润湿性的影响和钎缝结合界面的微观组织特征。结果表明,采用2s的超声波振动可有效去除钎料/母材界面的氧化膜,实现二者良好的润湿结合。盖板涂覆钎料时钎料中残留的缩孔、氧化膜夹杂是引起钎缝缺陷的主要原因。振动钎焊可成功实现翅片与盖板的组合焊接,钎缝成形良好,为铝合金板式散热器的焊接提供了一条新途径。
|
| 关 键 词： | LF6铝合金 振动钎焊 氧化膜 润湿 微观组织 |
Microstructure of wetting interface of LF6 alloy radiator soldered with the aid of vibration |
| |
| Authors: | Yu Kezhuang Peng Bo Fan Min Xu Zhiwu Yan Jiuchun |
| |
| Affiliation: | Yu Kezhuang1,Peng Bo1,Fan Min1,Xu Zhiwu2,Yan Jiuchun2(1.The 29th Research Institute of CETC,Chengdu 610036,China,2.State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | Vibration assisted soldering of the simulation specimen of LF6 alloy radiator under vacuum-free condition was investigated.Special attention was paid to the effect of vibration on the wettability of the solder and the microstructure of the bond region.The experimental results showed that for the shrinkages and residual oxides contained in the solidified solder on the cover plate were the sources of the defects in the bond region,the oxide film at the interface of solder and base metal was significantly remo... |
| |
| Keywords: | LF6 alloy vibration assisted soldering oxide film wetting microstructure |
| 本文献已被 CNKI 等数据库收录！ |
|
