| 核燃料夹具测试平台控制系统设计 |
| |
| 引用本文： | 方郁,赵阿朋,吴凤岐,陆秀生. 核燃料夹具测试平台控制系统设计[J]. 核动力工程, 2012, 33(4): 72-75 |
| |
| 作者姓名： | 方郁 赵阿朋 吴凤岐 陆秀生 |
| |
| 作者单位： | 中科华核电技术研究院,广东深圳,518026 |
| |
| 摘 要： | 作为核燃料装卸贮存系统的核心部件,核燃料夹具的功能性与耐久性测试至关重要。基于核燃料夹具实际工况,采用可靠的可编程逻辑控制器(PLC),利用液压驱动与气压驱动分别实现载荷的上升、下降与夹具的紧闭、解锁过程,提出电气硬件、PLC程序以及人-机界面的设计方案,搭建核燃料夹具测试平台。实际应用表明,该测试平台控制灵活、操作简单、可靠性高。
|
| 关 键 词： | 核燃料夹具 可编程逻辑控制器 液压驱动 气压驱动 人-机界面 |
Design of Control System for Test Platform of Nuclear Fuel Gripper |
| |
| FANG Yu , ZHAO A-peng , WU Feng-qi , LU Xiu-sheng. Design of Control System for Test Platform of Nuclear Fuel Gripper[J]. Nuclear Power Engineering, 2012, 33(4): 72-75 |
| |
| Authors: | FANG Yu ZHAO A-peng WU Feng-qi LU Xiu-sheng |
| |
| Affiliation: | China Nuclear Power Technology Research Institute,Shenzhen,Guangdong,518026,China |
| |
| Abstract: | As the key component in the fuel handing and storage system,the test on the function and durability of the fuel gripper is very important.Considering the actual work conditions of the gripper and using the programmable logic controller,the raising-lowering of the load and the locking and unlocking the gripper are implemented by the hydraulic drive and the pneumatic drive respectively.The design of the electrical hardware,PLC software and human machine interface software are also presented,and the test platform is established.The application shows that the control system of this test platform is with flexible control,convenient operation and high reliability. |
| |
| Keywords: | Nuclear fuel gripper Programmable logic controller Hydraulic drive Pneumatic drive Human machine interface |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
