首页 | 本学科首页   官方微博 | 高级检索  
     

核反应堆一回路系统水锤数值模拟
引用本文:左巧林,秋穗正,芦苇,苏光辉,田文喜,王盛,肖泽军.核反应堆一回路系统水锤数值模拟[J].核动力工程,2012,33(4):85-90.
作者姓名:左巧林  秋穗正  芦苇  苏光辉  田文喜  王盛  肖泽军
作者单位:1. 西安交通大学核科学与技术系,西安,710049
2. 中国核动力研究设计院,成都,610041
摘    要:采用特征线法,针对核反应堆一回路系统特点建立完整的数学物理方程和边界条件。自主开发WAHAP水锤计算程序,并对含止回阀的4泵并联系统在启动及切换工况下的水锤特性进行模拟计算。计算结果表明,所研究工况中有2个不同阶段存在阀瓣多次剧烈撞击阀座的过程和2种形式的压差震荡。

关 键 词:水锤  核反应堆  数值模拟  特征线法

Numerical Simulation of Water Hammer Characteristics for Integral Reactor Primary Circuit
ZUO Qiao-lin , QIU Sui-zheng , LU Wei , SU Guang-hui , TIAN Wen-xi , WANG Sheng , XIAO Ze-jun.Numerical Simulation of Water Hammer Characteristics for Integral Reactor Primary Circuit[J].Nuclear Power Engineering,2012,33(4):85-90.
Authors:ZUO Qiao-lin  QIU Sui-zheng  LU Wei  SU Guang-hui  TIAN Wen-xi  WANG Sheng  XIAO Ze-jun
Affiliation:1.Department of Nuclear Science and Technology,Xi’an Jiaotong University,Xi’an,710049,China; 2.Nuclear Power Institute of China,Chengdu,610041,China
Abstract:Based on the method of characteristic line,a set of closed mathematic expressions with reasonable boundary conditions of the nuclear reactor primary circuit has been established.WAHAP program has been developed,and numerical calculation is carried out on the check valve-induced water hammer phenomena in a four pumps paralleled feedwater system during the alternating startup process of parallel pumps.In this paper,we found that the valve disc stroke the valve seat at two different periods and there were two kinds of pressure vibration existed.
Keywords:Water hammer  Nuclear reactor  Numerical simulation  Method of characteristic line
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号