| 清理铸件输送辊道的改进 |
| |
| 引用本文： | 李庆东,毛国胜. 清理铸件输送辊道的改进[J]. 铸造工程, 2012, 0(6): 35-37 |
| |
| 作者姓名： | 李庆东 毛国胜 |
| |
| 作者单位： | 广西玉柴机器股份有限公司,广西玉林,537005 |
| |
| 摘 要： | 清理工序的铸件输送辊道,由于铸件型号及控制程序等原因造成辊道故障,严重影响生产效率。在分析辊道输送系统和故障原因的基础上,通过改进压紧气囊、光电开关、完善PLC程序等措施,彻底解决了翻转机铸件掉落的问题,有效改善了辊道堵塞,铸件碰伤、磨伤等状况。
|
| 关 键 词： | 铸件清理 输送辊道 翻转机 PLC程序 |
Improvement of Transfer Table for Cleaning Castings |
| |
| Li Qingdong,Mao Guosheng. Improvement of Transfer Table for Cleaning Castings[J]. Foundry Engineering, 2012, 0(6): 35-37 |
| |
| Authors: | Li Qingdong Mao Guosheng |
| |
| Affiliation: | (Guangxi Yuchai Machinery Co., Ltd., Yulin 537005, Guangxi, China) |
| |
| Abstract: | The transfer table faults caused by casting type and control program in cleaning casting process affect the production efficiency seriously. The roller transport system and fault reasons were analyzed, and the compression air bag, optoelectronic switch and PLC program was improved. The problems, such as castings dropped out, roller jammed and castings damaged were solved effectively. |
| |
| Keywords: | cleaning of casting transfer table upender PLC program |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
