首页 | 本学科首页   官方微博 | 高级检索  
     

红外热像仪性能参数检测系统校正方法研究
引用本文:宿军,王劲松,李延风,刘斯尧.红外热像仪性能参数检测系统校正方法研究[J].长春理工大学学报,2018(2):80-82.
作者姓名:宿军  王劲松  李延风  刘斯尧
作者单位:长春理工大学 光电工程学院,长春,130022
基金项目:吉林省科技支撑计划重大专项(KYC-JC-YM-2012-081)
摘    要:红外热像仪各项性能的检测离不开红外成像系统性能测试设备,测试系统的校正对于性能参数的检测和修正至关重要。针对红外热像仪性能参数检测系统的参数检测需求,进行了系统校正方法的研究。设计完成了校正系统,利用物理温差与辐射温差的关系,测量得到一系列的温度分布曲线。采用最小二乘方法对测试数据进行线性拟合,完成了测试系统校正系数的标定。实验结果表明,该方法解决了检测系统校正的技术问题。满足标定测试要求。对于红外热像仪性能参数检测系统的应用具有重要的实用价值和意义。

关 键 词:红外热像仪  最小可分辨温差  黑体辐射源  infrared  thermal  imaging  system  MRTD  blackbody  radiation  source

Study on the Correction Method of Infrared Thermal Imager Performance Parameter Testing System
SU Jun,WANG Jinsong,LI Yanfeng,LIU Siyao.Study on the Correction Method of Infrared Thermal Imager Performance Parameter Testing System[J].Journal of Changchun University of Science and Technology,2018(2):80-82.
Authors:SU Jun  WANG Jinsong  LI Yanfeng  LIU Siyao
Abstract:The performance testing of infrared thermal imager is essential for the performance testing equipment. The calibration of the testing system is very important to the detection and correction of the performance parameters. In this paper,the correction method was discussed for the parameter detection requirements of infrared thermal imager parame-ter testing system. The calibration system was designed and completed. Using the relation between physical temperature difference and radiation temperature difference,a series of temperature distribution curves were obtained. The calibration of the calibration coefficient was obtained by using the least square method to carry out the linear fitting of the test data. This method solved the technical problem of calibration and accorded with the requirements of calibration. It has impor-tant practical value and significance for the application of infrared thermal imager performance parameter testing system.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号