首页 | 本学科首页   官方微博 | 高级检索  
     


Switching characteristics of vacuum gap switch employing UV‐laser triggering
Authors:Kazunori Satou  Akira Sugawara  Takayuki Itou  Kouichi Itagaki
Abstract:The switching time and arc‐ignition probability of a sustained main discharge in a laser trigger vacuum gap were measured. The third harmonic beam of an Nd:YAG pulse laser (wavelength 355 nm, energy 5 mJ/pulse, power density 4 × 107 W/cm2) was used to trigger the gap. The main electrodes 85 mm in diameter were made of oxygen‐free copper. The gap length was 1.6 mm and the experimental chamber was evacuated to about 1.3 × 104 Pa by a turbomolecular pump. The UV beam from the laser was focused at normal incidence onto the grounded cathode. The switching time decreased and the arc‐ignition probability increased with increasing applied voltage. The switching time was 326 ns at 15 kV with a circuit inductance of 107 μH. Its jitter was 24.8 ns. The advantageous results obtained with the UV beam are compared to the previously reported data on triggered vacuum gaps. © 2000 Scripta Technica, Electr Eng Jpn, 132(3): 8–13, 2000
Keywords:ultraviolet laser triggered vacuum gap switch  arc‐ignition probability  switching time  main circuit inductance
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号