| 基于CAD/CAE对塑件注射工艺参数与浇口的优化 |
| |
| 引用本文： | 董定乾. 基于CAD/CAE对塑件注射工艺参数与浇口的优化[J]. 模具工业, 2010, 36(3): 1-5 |
| |
| 作者姓名： | 董定乾 |
| |
| 作者单位： | 盐城纺织职业技术学院,机电工程系,江苏,盐城,224005 |
| |
| 基金项目： | 江苏盐城纺织职业技术学院技术应用项目(yfy0936) |
| |
| 摘 要： | 采用Pro/E对遥控器上盖进行造型,应用CAE软件Moldflow对实例进行网格划分、创建浇注系统、冷却系统,采用正交试验分析注射成型过程中充填、流动、冷却及翘曲变形等关键因素,得到合理的注射工艺参数与浇口位置,从而优化模具结构,缩短产品开发周期,提高注射产品质量。
|
| 关 键 词： | 遥控器上盖 CAE 正交试验 |
Optimization of injection molding parameters and gates based on CAD/CAE technology |
| |
| DONG Ding-qian. Optimization of injection molding parameters and gates based on CAD/CAE technology[J]. Die & Mould Industry, 2010, 36(3): 1-5 |
| |
| Authors: | DONG Ding-qian |
| |
| Affiliation: | School of Mechanical and Electrical Engineering/a>;Yancheng College of Textile Technology/a>;Yancheng/a>;Jiangsu 224005/a>;China |
| |
| Abstract: | The Pro/E software was used for the modeling of a remote controller top head and then CAE software Moldflow was applied to the mesh generation of the product. The gating system and cooling system were established, respectively and then orthogonal test method was used to analyze the key factors in the injection molding process, including the filling, flowing, cooling and warpage, etc. Optimized technological parameters, gate location and mould structure were obtained and therefore, the development period was... |
| |
| Keywords: | CAE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
