首页 | 本学科首页   官方微博 | 高级检索  
     

炳灵水电站机组防飞逸的设计探讨
引用本文:赵有东,段宏江,李洋. 炳灵水电站机组防飞逸的设计探讨[J]. 西北水电, 2009, 0(1)
作者姓名:赵有东  段宏江  李洋
作者单位:1. 中国水电顾问集团西北勘测设计研究院,西安,710065;西安理工大学,西安,710048
2. 中国水电顾问集团西北勘测设计研究院,西安,710065
3. 甘肃电投炳灵水电开发有限责任公司,刘家峡,731600
摘    要:当机组因事故甩负荷时,机组调速系统同时发生某种故障,不能关闭导水机构,机组将发生过速甚至达到飞逸转速,可能使机组转动部分产生不同程度的损坏,甚至造成严重后果.为了防止机组损坏,在电站设计方面则需要采取防止飞逸或限制飞逸转速值的措施.对于灯泡贯流式机组因其引水方式、流道布置等要求,其防飞逸装置的特点和相应措施也与常规混流式机组不一致.炳灵水电站采用了由重锤卸荷阀、纯机械液压保护装置控制的重锤力矩和机组自关闭动水力矩相结合的方法作为机组防飞逸措施.

关 键 词:炳灵水电站  灯泡机组  防飞逸措施

Discussion on anti-runaway design for units of Binling hydropower station
ZHAO You-dong,DUAN Hong-jiang,LI Yang. Discussion on anti-runaway design for units of Binling hydropower station[J]. Northwest Water Power, 2009, 0(1)
Authors:ZHAO You-dong  DUAN Hong-jiang  LI Yang
Affiliation:1.Northwest Hydro Consulting Engineers;CHECC;Xi'an 710065;China;2.Xi'an University of Technology;Xi'an 710048;3.Binling Hydropower Development Company Ltd.;Liujiaxia 731600;China
Abstract:When the unit rejects load due to accident and meanwhile the governing system has something wrong and can not shut off the distributor,the unit will run at over-speed or even reach runaway speed,which will result in certain damages of rotating parts or more serious consequence.Measures shall be taken in unit design to prevent runaway or limit runaway values in order to protect units against damages.As for the requirements of diversion type and flow passage layout of bulb tubular units,the characteristics of...
Keywords:Binling hydropower station  bulb unit  anti-runaway measures  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号