| 碳氧平衡在低碳低硅钢RH轻处理工艺中的应用 |
| |
| 引用本文： | 朱坦华,颜慧成,汤海明,程迪,王现周.碳氧平衡在低碳低硅钢RH轻处理工艺中的应用[J].炼钢,2021,37(1):39-43. |
| |
| 作者姓名： | 朱坦华 颜慧成 汤海明 程迪 王现周 |
| |
| 作者单位： | 河北钢铁集团邯钢公司,河北邯郸056015;河北钢铁集团邯钢公司,河北邯郸056015;河北钢铁集团邯钢公司,河北邯郸056015;河北钢铁集团邯钢公司,河北邯郸056015;河北钢铁集团邯钢公司,河北邯郸056015 |
| |
| 摘 要： | 通过对低碳低硅钢炼钢过程碳氧平衡进行系统计算,结合RH轻处理工艺要求,详细分析了过程碳、氧含量的控制要点,结果表明:CO分压对碳氧积的影响比钢水温度更加显著;RH生产超低碳钢时要求极限真空度和较高的平衡氧含量;RH轻处理生产低碳低硅钢的适宜条件是进站初始碳质量分数0.03%~0.04%、初始氧质量分数0.04%~0.05%、真空度5 kPa,研究规律在生产中得到了应用与验证。
|
| 关 键 词： | 碳氧平衡 RH轻处理 低碳低硅钢 |
Application of carbon-oxygen equilibrium in RH soft-treating process for low carbon and low silicon steel |
| |
| ZHU Tanhua,YAN Huicheng,TANG Haiming,CHENG Di,WANG Xianzhou.Application of carbon-oxygen equilibrium in RH soft-treating process for low carbon and low silicon steel[J].Steelmaking,2021,37(1):39-43. |
| |
| Authors: | ZHU Tanhua YAN Huicheng TANG Haiming CHENG Di WANG Xianzhou |
| |
| Affiliation: | (Hansteel Branch,HBIS Group,Handan 056015,China) |
| |
| Abstract: | Carbon-oxygen equilibrium in steelmaking process was systemically calculated. Control points of carbon and oxygen content were analyzed in detail based on the technological requirement of RH soft treating process. The results showed that the effect of CO partial pressure on carbon-oxygen equilibrium was more significant than that of molten steel temperature. The ultrahigh vacuum and suitable mass fraction of equilibrium oxygen were needed for RH process to produce ultra-low carbon steel. It was suitable for production of low carbon and low silicon steel with RH soft treating at vacuum degree 5 kPa,initial carbon mass fraction 0.03 %-0.04 % and initial oxygen mass fraction 0.04 %-0.05 %. The result was applied and verified in actual production of low carbon and low silicon steel. |
| |
| Keywords: | carbon-oxygen equilibrium RH soft treating process low carbon and low silicon steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
