| 数控插补软件芯片的总线设计 |
| |
| 引用本文： | 王慧,叶佩青. 数控插补软件芯片的总线设计[J]. 机床与液压, 2006, 0(6): 14-16 |
| |
| 作者姓名： | 王慧 叶佩青 |
| |
| 作者单位： | 清华大学精密仪器与机械学系制造工程研究所,北京,100084;清华大学精密仪器与机械学系制造工程研究所,北京,100084 |
| |
| 摘 要： | 提出了使用总线管理插补数据的方法,并通过分析数控插补软件芯片的功能和完成这些功能所需要的数据,设计和构建了数控插补软件芯片的总线结构.从而规范了数控插补软件芯片的总线接口,使软件芯片结构清晰化,提高了软件芯片的兼容性、可重用性和可扩充性,具有重要的理论研究意义.
|
| 关 键 词： | 数控系统 开放式 软件芯片 数控插补 总线 |
| 文章编号： | 1001-3881(2006)6-014-3 |
| 收稿时间： | 2005-04-08 |
| 修稿时间： | 2005-04-08 |
Design of the Date Bus in CNC System Interpolation Software IC |
| |
| WANG Hui,YE Peiqing. Design of the Date Bus in CNC System Interpolation Software IC[J]. Machine Tool & Hydraulics, 2006, 0(6): 14-16 |
| |
| Authors: | WANG Hui YE Peiqing |
| |
| Affiliation: | Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China |
| |
| Abstract: | Functions and data of CNC system interpolation software IC were discussed. Based on the discussion result, data bus of the software IC was constructed. By using this bus, structure of the software was clarified, and the compatibility, expansibility and reusability were improved obviously. |
| |
| Keywords: | CNC system Open - architecture Software IC CNC interpolation Bus |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
