网栅参数对切割式多破片战斗部发散角的影响 |
| |
引用本文: | 赵长啸,张洋溢,路亮,徐建国,赵东华,李惠明. 网栅参数对切割式多破片战斗部发散角的影响[J]. 火工品, 2016, 0(1): 22-25. DOI: 10.3969/j.issn.1003-1480.2016.01.006 |
| |
作者姓名: | 赵长啸 张洋溢 路亮 徐建国 赵东华 李惠明 |
| |
作者单位: | 1. 武汉军械士官学校,湖北 武汉,430075;2. 广州军区工程科研设计所,广东 广州,510515;3. 中国人民解放军72351部队,山东莱芜,271109 |
| |
摘 要: | 为提高切割式多破片战斗部对目标的打击概率,在试验研究的基础上利用LS-DYNA仿真软件研究了切割网栅参数对战斗部发散角的影响。研究表明:随着切割丝安装距离的增加,破片发散角逐渐减小;相对于圆柱形,截面形状为楔形的切割丝切割效率更高,单位长度发散角变化值更小。
|
关 键 词: | 爆炸力学 多破片战斗部 发散角 模拟 |
Influence of Incisive Cover Factor on Radial Dispersion Angle of A Incised Multiple Fragments Warhead |
| |
Abstract: | In order to improve the hit probability of incised multiple fragments warhead, based on the experimental results, the influence of incisive cover factor on radial dispersion angle was analyzed by LS-DYNA. The result shows that as the distance between incisive cover and liner increasing, the radial dispersion angle decreases. And cutting efficiency of wedge-shaped incisive cover is better than that of cylinder, as well as the change value of radial dispersion angle per unit length is smaller. |
| |
Keywords: | Explosive mechanicals Multiple fragments warhead Radial dispersion angle Simulation |
本文献已被 CNKI 万方数据 等数据库收录! |
|