Three‐dimensional analyses of in‐plane and out‐of‐plane crack‐tip constraint characterization for fracture specimens

Three‐dimensional elastic–plastic finite element analyses have been conducted for 21 experimental specimens with different in‐plane and out‐of‐plane constraints in the literature. The distributions of five constraint parameters (namely T‐stress, Q, h, T_z and A_p) along crack fronts (specimen thickness) for the specimens were calculated. The capability and applicability of the parameters for characterizing in‐plane and out‐of‐plane crack‐tip constraints and establishing unified correlation with fracture toughness of a steel were investigated. The results show that the four constraint parameters (T‐stress, Q, h and T_z) based on crack‐tip stress fields are only sensitive to in‐plane or out‐of‐plane constraints. Therefore, the monotonic unified correlation curves with fracture toughness (toughness loci) cannot obtained by using them. The parameter A_p based on crack‐tip equivalent plastic strain is sensitive to both in‐plane and out‐of‐plane constraints, and may effectively characterize both of them. The monotonic unified correlation curves with fracture toughness can be obtained by using A_p. In structural integrity assessments, the correlation curves may be used in the failure assessment diagram (FAD) methodology for incorporating both in‐plane and out‐of‐plane constraint effects in structures for improving accuracy.