| 发动机水套冷却性能分析 |
| |
| 引用本文： | 王楠,唐刚志,张力.发动机水套冷却性能分析[J].机械,2011,38(12):1-4. |
| |
| 作者姓名： | 王楠 唐刚志 张力 |
| |
| 作者单位： | 重庆大学机械工程学院,重庆,400030 |
| |
| 基金项目： | 重庆市自然科学基金资助项目，国防基础科研项目 |
| |
| 摘 要： | 利用数值模拟对某汽油机的冷却水套进行了冷却性能研究,对原机冷却水套内冷却水的流场分布、冷却水套内壁面换热系数和压力损失进行了分析.计算结果表明:该汽油机冷却水套总体分布合理,设置的8个分水孔各自取到不同的作用；通过大孔B1、B2的流体用于冷却鼻梁区等重点区域,其它孔主要用来将绕流缸体的冷却水引入缸盖,对缸盖冷却起补充作...
|
| 关 键 词： | 发动机 数值模拟 CFD分析 冷却水套 |
Analysis the cooling performance of cooling jacket in engine |
| |
| WANG Nan,TANG Gang-zhi,ZHANG Li.Analysis the cooling performance of cooling jacket in engine[J].Machinery,2011,38(12):1-4. |
| |
| Authors: | WANG Nan TANG Gang-zhi ZHANG Li |
| |
| Affiliation: | (College of Mechanical Engineering,Chongqing University,Chongqing 400030,China) |
| |
| Abstract: | In this paper, the cooling performance of the cooling jacket used on IC engine was studied numerically, The flow field of cooling water in the water cooling jacket, the heat convection coefficient of the inner wall, the whole pressure loss for the original engine were analyzed. The results show that the structure of the water cooling jacket is reasonable, with 8 holes playing different roles, in which the large holes, Bland B2, supply water to cool the bridge of the nose area and other areas with heavy heat load in cylinder head and the other holes play complement roles for the cooling. The fluid velocity in the areas with heavy heat load is greater than 0.5m/s filling the cooling requirement and there is no static water overall avoiding potential overheating accidents |
| |
| Keywords: | IC engine numerical simulation CFD analysis cooling water jacket |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
