Abstract: | A package of procedures have been developed to collect and analyze the response of dynamic variables such as pressure, temperature, and mold separation during the compression molding of Sheet Molding Compound (SMC). From the dynamic responses, the molding process was found to consist of two regions: the flow and the subsequent curing reaction region. With an R-25 formulation and a mold closing rate of 30 mm/s, these two regions are well separated and the average flow time is not significantly affected by the maturation time for the material up to 30 days. Several mechanical parameters were estimated based on relatively simple flow models. The relationship between the press force, mold separation, and mold closing rate is found to be sensitive to the restrictions of the flow. |