首页 | 本学科首页   官方微博 | 高级检索  
     

冷却条件对铝板坯变形影响的试验研究
引用本文:李朝霞,郑贤淑,曹志强.冷却条件对铝板坯变形影响的试验研究[J].铸造,2000,49(11):832-834.
作者姓名:李朝霞  郑贤淑  曹志强
作者单位:大连理工大学铸造工程研究中心,辽宁大连
基金项目:国家自然科学基金资助项目(59995442)。
摘    要:设计了动态测量板坯温度场和变形过程的试验装置,通过采用不同冷却边界条件的水库,研究了边界条件对板坯温度场和变形的影响。探索了板坯的变形行为与温度场的关系及其控制方法,试验表明:板坯的凝固进程直接影响其成形及冷却后的外形轮廓,四周均匀的凝固进程有利于得到平直板坯。

关 键 词:电磁连铸  铝板坯  凝固进程  冷却条件  变形
文章编号:1001-4977(2000)11-0832-04
修稿时间:2000年3月1日

An Experimental Study about Influence of Cooling Conditions on the Pull-in of Aluminum Slabs
LI Zhao xia,ZHENG Xian shu,CAO Zhi qiang.An Experimental Study about Influence of Cooling Conditions on the Pull-in of Aluminum Slabs[J].Foundry,2000,49(11):832-834.
Authors:LI Zhao xia  ZHENG Xian shu  CAO Zhi qiang
Abstract:An experimental setup has been designed to measure the temperature field of the slabs and the dynamic pull in of their center of the broad faces.Different kinds of water tank around the slab have been used to observe the influence of cooling condition on the temperature field and pull in of the slab being solidifying.It is shown that reasonable solidification process can remarkably decrease the pull in of the slab.
Keywords:electromagnetic casting  continuous casting  aluminum slab  solidification process  cooling
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号