首页 | 本学科首页   官方微博 | 高级检索  
     

螺旋压榨式脱水机对污泥脱水的试验研究
引用本文:李佟,李军,刘伟岩,何继文,温海滨,李大功,任健. 螺旋压榨式脱水机对污泥脱水的试验研究[J]. 中国给水排水, 2009, 25(11)
作者姓名:李佟  李军  刘伟岩  何继文  温海滨  李大功  任健
作者单位:1. 北京工业大学,北京市水质科学与水环境恢复工程重点实验室,北京,100022;北京城市排水集团,高碑店污水处理厂,北京,100022
2. 北京工业大学,北京市水质科学与水环境恢复工程重点实验室,北京,100022
3. 北京城市排水集团,高碑店污水处理厂,北京,100022
4. 日本石垣株式会社,日本国
摘    要:考察了螺旋压榨式脱水机对污泥的脱水性能.结果表明:对于含水率为97.9%的消化污泥,在絮凝剂投配率为0.51%、螺杆转速为0.25 r/min的条件下,脱水后泥饼含水率最低可达70.3%、固形物回收率为98.89%、污泥处理量为24.84 kg/h;对于含水率为99.7%的剩余污泥,在絮凝剂投配率为0.94%、螺杆转速为0.75 r/min的条件下,脱水后泥饼含水率为82.5%、固形物回收率为92.46%、污泥处理量为8.64 kg/h.螺旋压榨式脱水机对污泥的处理效果较带式脱水机有很大提高.

关 键 词:螺旋压榨式脱水机  污泥  脱水  絮凝剂  含水率

Experimental Research on Sludge Dewatering by Screw Press Dehydrator
LI Tong,LI Jun,LIU Wei-yan,HE Ji-wen,WEN Hai-bin,LI Da-gong,REN Jian. Experimental Research on Sludge Dewatering by Screw Press Dehydrator[J]. China Water & Wastewater, 2009, 25(11)
Authors:LI Tong  LI Jun  LIU Wei-yan  HE Ji-wen  WEN Hai-bin  LI Da-gong  REN Jian
Affiliation:LI Tong1,2,LI Jun1,LIU Wei-yan1,HE Ji-wen2,WEN Hai-bin3,LI Da-gong1,REN Jian1(1.Key Laboratory of Beijing for Water Quality Science and Water Environmental Recovery Engineering,Beijing University of Technology,Beijing 100022,China,2.Gaobeidian Wastewater Treatment Plant,Beijing Drainage Group Co.Ltd.,3.ISHIGAKI Co.,Japan)
Abstract:The sludge dewatering performance of screw press dehydrator was investigated.The results show that for the digested sludge with moisture content of 97.9%,under the condition of flocculant dosing rate of 0.51% and screw speed of 0.25 r/min,the minimum cake moisture content after dewatering is 70.3%,the solid recovery is 98.89% and the sludge treatment capacity is 24.84 kg/h.For the excess sludge with moisture content of 99.7%,under the condition of flocculant dosage rate of 0.94% and screw speed of 0.75 r/mi...
Keywords:screw press dehydrator  sludge  dewatering  flocculant  moisture content  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号