| 大型船用卷板机卷板成形过程的数值模拟 |
| |
| 引用本文： | 陈兰,张新洲,孙宇,常欣,杨树田. 大型船用卷板机卷板成形过程的数值模拟[J]. 锻压技术, 2011, 36(5): 76-80. DOI: 10.3969/j.issn.1000-3940.2011.05.019 |
| |
| 作者姓名： | 陈兰 张新洲 孙宇 常欣 杨树田 |
| |
| 作者单位： | 1. 南京理工大学机械工程学院,江苏南京,210094
2. 泰安华鲁锻压机床有限公司,山东泰安,271000 |
| |
| 基金项目： | 国家科技重大专项资助项目 |
| |
| 摘 要： | 首先对卷板成形过程进行了理论分析；然后用有限元分析软件ABAQUS对某大型船用卷板机板料滚弯成形及回弹的过程进行模拟,得到了成形件的应力分布与应变分布；研究了上辊不同下压量对其成形过程的影响,分析了滚弯过程中辊子和板料间的法向接触正压力,并将仿真值和理论计算值进行了比较,分析了产生误差的原因.同时,分析了辊子对板料的切...
|
| 关 键 词： | 卷板机 滚弯过程 回弹 下压力 驱动扭矩 |
Numerical simulation of bending process for large marine bending machine |
| |
| CHEN Lan,ZHANG Xin-zhou,SUN Yu,CHANG Xin,YANG Shu-tian. Numerical simulation of bending process for large marine bending machine[J]. Forging & Stamping Technology, 2011, 36(5): 76-80. DOI: 10.3969/j.issn.1000-3940.2011.05.019 |
| |
| Authors: | CHEN Lan ZHANG Xin-zhou SUN Yu CHANG Xin YANG Shu-tian |
| |
| Affiliation: | 1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China; 2.Tai`an Hualu Metalforming Machine Tool Co.,Ltd.,Taian 271000,China) |
| |
| Abstract: | The bending and spring-back process of a certain large marine bending machine was successfully simulated by using the finite element software ABAQUS and distributions of the stress and the strain were obtained.The impact of the press displacement of the upper roller on the forming process of bending machine was studied.The normal contact pressure between the roller and sheet metal in the bending process was analyzed,the simulative results and the theoretical calculation were compared,and the reasons of errors were analyzed.At the same time,the tangential friction between the roller and sheet metal was obtained,and then the drive torque was calculated.The calculated results provide the basis for the choice of the power system of the bending machine.The obtained achievements are useful for the optimal design of bending machine equipments and the practical sheet forming process study in general. |
| |
| Keywords: | bending machine roll-bending process spring-back down force drive torque |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
