| 摩托车前护板注射模具设计 |
| |
| 引用本文： | 洪建明. 摩托车前护板注射模具设计[J]. 工程塑料应用, 2008, 36(7) |
| |
| 作者姓名： | 洪建明 |
| |
| 作者单位： | 深圳职业技术学院机电工程学院,深圳,518055 |
| |
| 摘 要： | 通过对摩托车前护板的工艺分析,介绍了该塑料件的注射模具结构和设计要点。分析了大中型注射模具斜顶机构的常见设计方式,给出了卡槽轴线与水平成一定角度的特殊斜顶的设计方法,解决了斜顶顶出过程中的铲胶问题,实现了塑料件的顺利顶出和生产。
|
| 关 键 词： | 摩托车前护板 注射模具 斜顶 滑块 抽芯 |
DESIGN OF INJECTION MOULD FOR FRONT SAFETY GUARD OF MOTORCYCLE |
| |
| Hong Jianming. DESIGN OF INJECTION MOULD FOR FRONT SAFETY GUARD OF MOTORCYCLE[J]. Engineering Plastics Application, 2008, 36(7) |
| |
| Authors: | Hong Jianming |
| |
| Abstract: | By analyzing the process of front safety guard of motorcycle,the overall mould structure and key design points for this product were introduced.The common structure of angle lift in large or middle injection mould was analyzed,and novel design method for the special angle lift where there was an angle between rib axes and horizontal line was put forward.The problem that product was scraped off in ejection process was resolved.Product was ejected and produced easily by adopting this mould structure. |
| |
| Keywords: | front safety guard of motorcycle injection mould angle lift slide loose core |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
