| 采用UG二次开发的逆向工程数据处理方法 |
| |
| 引用本文： | 周敏,杨南粤.采用UG二次开发的逆向工程数据处理方法[J].工程图学学报,2009,30(5). |
| |
| 作者姓名： | 周敏 杨南粤 |
| |
| 作者单位： | 广东技术师范学院工业中心,广东,广州,510665 |
| |
| 摘 要： | 在分析三坐标测量机输出文件规则的基础上,针对逆向工程数据处理中存在的重复操作、精度不高等问题,利用UG的二次开发工具UG/OPEN GRIP,编写了"点云分层"和"数据投影"两个程序,减少了数据处理的重复操作,提高了UG软件在逆向工程中的应用效率,为逆向工程中的应用问题找到了一种新的解决思路和方法.
|
| 关 键 词： | 计算机应用 数据处理 逆向工程 UG二次开发 |
Method of Data Processing in Reverse Engineering Relied on the Second Development of UG |
| |
| ZHOU Min,YANG Nan-yue.Method of Data Processing in Reverse Engineering Relied on the Second Development of UG[J].Journal of Engineering Graphics,2009,30(5). |
| |
| Authors: | ZHOU Min YANG Nan-yue |
| |
| Affiliation: | ZHOU Min,YANG Nan-yue(Industry Center,Guangdong Polytechnic Normal University,Guangzhou Guangdong 510665,China) |
| |
| Abstract: | After analyzing the rules of output data files from CMM,both Catch_Point and Data_Correct programs developed by UG/OPEN GRIP are written to solve the fussy operations for selected points and data projection,which enhance the efficiency of model reconstruction greatly.It may be the new method to solve the application problems in reverse engineering. |
| |
| Keywords: | computer application data processing reverse engineering second development of UG |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
