| 基于弹流润滑的弧齿锥齿轮的加工修正方法 |
| |
| 引用本文： | 王延忠,周云飞,周济,李左章,李小清.基于弹流润滑的弧齿锥齿轮的加工修正方法[J].机械工程学报,2002,38(7):70-75. |
| |
| 作者姓名： | 王延忠 周云飞 周济 李左章 李小清 |
| |
| 作者单位： | 华中科技大学国家数控技术工程中心,武汉,430074 |
| |
| 基金项目： | 国家自然科学基金资助项目（59775087） |
| |
| 摘 要： | 在弧齿锥齿轮加载接触分析基础上,分析机床调整切齿参数对弧齿锥齿轮弹流润滑特性的影响,推导出油膜厚度与机床调整切齿参数之间的关系式,定性定量地分析了油膜与机床调整切齿参数的关系。提出给定油膜厚度条件下,机床调整参数修正方法。
|
| 关 键 词： | 弧齿锥齿轮 机床切齿调整参数 弹流润滑 |
| 修稿时间： | 2001年4月24日 |
CORRECTIONAL METHOD OF SPIRAL BEVEL GEAR MACHINING BASED ON ELASTOHYDRODYNAMIC LUBRICATION |
| |
| Wang Yanzhong Zhou Yunfei Zhou JiLi Zuozhang Li Xiaoqing Huazhong University of Science and Technology.CORRECTIONAL METHOD OF SPIRAL BEVEL GEAR MACHINING BASED ON ELASTOHYDRODYNAMIC LUBRICATION[J].Chinese Journal of Mechanical Engineering,2002,38(7):70-75. |
| |
| Authors: | Wang Yanzhong Zhou Yunfei Zhou JiLi Zuozhang Li Xiaoqing Huazhong University of Science and Technology |
| |
| Affiliation: | Wang Yanzhong Zhou Yunfei Zhou JiLi Zuozhang Li Xiaoqing Huazhong University of Science and Technology |
| |
| Abstract: | On the basis of loaded tooth contact analysis of spiral bevel gear, the influence of gear cutting parameter adjustment to the elastohydrodynamic lubrication character is ana-lyzed. The formula showing the relation of film thickness to gear cutting parameter adjustment of machine tool has been derived. Their relationship is analyzed qualitatively and quan-titatively. Correction method for parameter adjustment of machine tool under the prefixed condition of film thickness is proposed. |
| |
| Keywords: | Spiral bevel gearParameter adjustment of machine tool Elastohydrodynamic lubrication |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
