| 基于UGNX的机床夹具标准件库的开发 |
| |
| 引用本文： | 刘爽,侯开虎,蒋思宝. 基于UGNX的机床夹具标准件库的开发[J]. 中国制造业信息化, 2011, 40(13) |
| |
| 作者姓名： | 刘爽 侯开虎 蒋思宝 |
| |
| 作者单位： | 昆明理工大学机电工程学院,云南昆明,650093 |
| |
| 摘 要： | 针对传统的夹具设计方法由于劳动强度大、设计周期长和效率低等缺点已成为制约现代制造技术发展的瓶颈这一问题,以UGNX为开发平台,以VC++6.0为开发环境,利用UGNX提供的UG/OPEN MenuScript、UG/OPEN UIStyler和UG/OPEN API二次开发模块,建立了机床夹具标准件库。经验证,该标准件库的建立对提高夹具设计效率,缩短夹具开发周期具有重要意义。
|
| 关 键 词： | 机床夹具 UGNX二次开发 标准件库 |
Development of Standard Parts Library Based on UGNX Machine Tool Fixture |
| |
| LIU Shuang,HOU Kai-hu,JIANG Si-bao. Development of Standard Parts Library Based on UGNX Machine Tool Fixture[J]. Manufacture Information Engineering of China, 2011, 40(13) |
| |
| Authors: | LIU Shuang HOU Kai-hu JIANG Si-bao |
| |
| Affiliation: | LIU Shuang,HOU Kai-hu,JIANG Si-bao(Kunming University of Science and Technology,Yunnan Kunming,650093,China) |
| |
| Abstract: | The traditional fixture design method has become bottleneck of restricting the development of modern manufacturing technology due to it's shortcomings of labor-intensive,long design cycle and low efficiency.To solve this problem,it builds the fixture standard parts library in VC++ 6.0 development environment with UG/OPEN MenuScript,UG/OPEN UIStyler and UG/OPEN API secondary development module.The application shows that the foundation of standard parts library is important for improving fixture designed effi... |
| |
| Keywords: | Fixture UGNX Secondary Development Standard Parts Library |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
