| 高频脉冲电解加工电源的研制 |
| |
| 引用本文： | 陈远龙,杨胜. 高频脉冲电解加工电源的研制[J]. 机电工程技术, 2012, 0(9): 75-78 |
| |
| 作者姓名： | 陈远龙 杨胜 |
| |
| 作者单位： | 合肥工业大学特种加工研究所,安徽合肥 230009 |
| |
| 基金项目： | 国家自然科学基金项目（编号：51075111） |
| |
| 摘 要： | 近些年研究发现脉冲电流电解加工比起直流电解加工有更高的加工精度,为此研制了一套以IGBT(绝缘栅双极型晶体管)作为斩波元件的全桥逆变高频脉冲电解加工电源。详述了电源的总体结构、全桥逆变电路、以SG3525A为PWM(脉冲宽度调制)控制芯片的脉冲信号发生电路及调节电路和IGBT驱动电路的原理和过程。提出了一种使用大容量IGBT作为泄流元件的快速短路保护系统。该电源可输出占空比可调,频率达40kHz,最大为2kA的脉冲电流,输出波形稳定、不失真。
|
| 关 键 词： | 电解加工 高频脉冲电源 IGBT SG3525A 快速短路保护系统 |
Development of High-Frequency Pulse Supply for ECM |
| |
| CHEN Yuan-long,YANG Sheng. Development of High-Frequency Pulse Supply for ECM[J]. Mechanical & Electrical Engineering Technology, 2012, 0(9): 75-78 |
| |
| Authors: | CHEN Yuan-long YANG Sheng |
| |
| Affiliation: | (Institute of Non-Traditional Machining, Hefei University of Technology, Hefei230009, China) |
| |
| Abstract: | The recent studies show that pulse electrochemical （PECM） has higher machining accuracy than DC ECM. A kind of full-bridge inverter high-frequency pulse supply is developed, which uses IGBT to chop wave. Introducing detailed the general structure, the working theory and process of full-bridge inverter circuit, generating pulse circuit using SG3525A PWM control chip, PI regulator circuit and driving IGBT circuit. A quick short-circuit protection circuits method using high power IGBT as releasing current component is carried out. The value of the pulse current reaches 2kA/40kHz, duty-cycle can be adjusted and the waveform is stability and high fidelity. |
| |
| Keywords: | ECM High-Frequency Pulse Supply IGBT SG3525A quick short-circuit protection circuits |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
