首页 | 本学科首页   官方微博 | 高级检索  
     

在悬浮填料床工艺中对硝化实施自动控制的研究
引用本文:李娟英,夏四清,饶应福.在悬浮填料床工艺中对硝化实施自动控制的研究[J].中国给水排水,2008,24(3):25-28.
作者姓名:李娟英  夏四清  饶应福
作者单位:1. 上海水产大学,生命科学与技术学院,上海,200090
2. 同济大学,污染控制与资源化研究国家重点实验室,上海,200092
3. 上海市南汇区环境保护局,上海,200300
基金项目:国家高技术研究发展计划(863计划)
摘    要:在分析悬浮填料床硝化反应机理的基础上,为悬浮填料床中试装置设计、配备了自动控制系统,通过在线检测溶解氧和氨氮浓度来实现对硝化反应过程的实时控制。中试结果表明,控制系统运行稳定、反应灵活,处理出水中的氨氮浓度保持稳定,并达到了控制要求。此外,该自动控制系统还优化了曝气过程,使曝气量减少了约20%,降低了运行成本。

关 键 词:悬浮填料床  硝化  实时控制  氨氮  悬浮填料床  工艺  硝化反应机理  实施  自动控制  研究  Packed  Bed  Nitrification  Automatic  Control  运行成本  曝气量  反应过程  优化  控制要求  运行稳定  处理  结果  实时控制  氮浓度  溶解氧
文章编号:1000-4602(2008)03-0025-04
收稿时间:2007-10-31
修稿时间:2007年10月31

Study on Automatic Control of Nitrification on Suspended Packed Bed
LI Juan-ying,XIA Si-qing,RAO Ying-fu.Study on Automatic Control of Nitrification on Suspended Packed Bed[J].China Water & Wastewater,2008,24(3):25-28.
Authors:LI Juan-ying  XIA Si-qing  RAO Ying-fu
Affiliation:LI Juan-ying1,XIA Si-qing2,RAO Ying-fu3(1.College of Aqua-life Science , Technology,Shanghai Fisheries University,Shanghai 200090,China,2.State Key Lab of Pollution Control , Resources Reuse,Tongji Univer-sity,Shanghai 200092,3.Nanhui District Environmental Protection Bureau,Shanghai 200300,China)
Abstract:Based on the analysis of nitrification reaction mechanism on the suspended packed bed, an automatic control system was designed and equipped on the pilot-scale plant. The real-time control of nitrification can be achieved through on-line monitoring of dissolved oxygen and ammonia nitrogen concentrations. The pilot-scale test results show that the operation of the control system is stable and flexible, and the effluent concentration of ammonia nitrogen can meet the control requirement. The automatic control system optimizes the aeration process, and about 25% of the aeration rate is reduced and the operating cost is decreased.
Keywords:suspended packed bed  nitrification  real-time control  ammonia nitrogen
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号