| 基于RIE技术的倾斜表面SOI功率器件制备技术 |
| |
| 引用本文： | 张锐,郭宇锋,程玮,花婷婷. 基于RIE技术的倾斜表面SOI功率器件制备技术[J]. 固体电子学研究与进展, 2011, 31(3): 268-273 |
| |
| 作者姓名： | 张锐 郭宇锋 程玮 花婷婷 |
| |
| 作者单位： | 南京邮电大学电子科学与工程学院,南京,210003 |
| |
| 基金项目： | 国家自然科学基金项目，江苏省高校自然科学基金项目，江苏省高校自然科学重大基础研究项目，南通市科技项目 |
| |
| 摘 要： | 对一种具有倾斜表面漂移区SOI LDMOS的制造方法进行了研究,提出了多窗口反应离子刻蚀法来形成倾斜表面漂移区的新技术,建立了倾斜表面轮廓函数的数学模型,TCAD工具的2D工艺仿真证实了该技术的可行性,最终优化设计出了倾斜表面漂移区长度为15μm的SOI LDMOS.数值仿真结果表明,其最优结构的击穿电压可达350 V...
|
| 关 键 词： | 横向变厚度 绝缘体上硅 横向双扩散金属氧化物半导体场效应晶体管 反应离子刻蚀 |
Fabrication Technology of SOI Power Devices with a Gradient Surface in Drift Region Using Reactive Ion Etching |
| |
| ZHANG Rui,GUO Yufeng,CHENG Wei,HUA Tingting. Fabrication Technology of SOI Power Devices with a Gradient Surface in Drift Region Using Reactive Ion Etching[J]. Research & Progress of Solid State Electronics, 2011, 31(3): 268-273 |
| |
| Authors: | ZHANG Rui GUO Yufeng CHENG Wei HUA Tingting |
| |
| Abstract: | A novel manufacturing method of SOI LDMOS with a gradient surface drift region structure was proposed.Reactive ion etching by masking a series of windows was used to fabricate such a graded drift thickness region.A numerical model was derived and a computer program was developed to optimize the sizes and locations of the windows.The validity of the model was verified by performing 2D process and device simulations using TCAD software.Finally,an SOI LDMOS with the drift region length of 15μm was designed.Simulation by the TCAD software shows that the novel device presents a maximum breakdown voltage of 350 V and a minimum specific on-resistance of 1.95Ω?mm~2,as well as a good output characteristic. |
| |
| Keywords: | varied lateral thickness SOI LDMOS RIE |
| 本文献已被 万方数据 等数据库收录！ |
