首页 | 本学科首页   官方微博 | 高级检索  
     

用研究均匀腐蚀的方法探讨不锈钢孔蚀的稳定发展
引用本文:魏宝明,郝凌,杨忠英. 用研究均匀腐蚀的方法探讨不锈钢孔蚀的稳定发展[J]. 中国腐蚀与防护学报, 1988, 8(2): 113-119
作者姓名:魏宝明  郝凌  杨忠英
作者单位:南京化工学院;南京化工学院;南京化工学院
摘    要:通过研究18-8奥氏体不锈钢在模拟孔内溶液中的均匀腐蚀行为,定量研究了孔内溶液浓度和温度对孔蚀发展速率的影响。测定了试样在模拟孔内溶液中的极化曲线,并将极化曲线的塔菲尔区直线外推,得到理想极化曲线和自腐蚀电流密度,据此对测定实际孔蚀速率的间接方法作了初步探讨,并对孔蚀核再钝化的条件作了详细讨论。

收稿时间:1988-04-25

AN APPROACH TO THE PITTING STEADY GROWTH OF 18-8 AUSTENITIC STAINLESS STEEL UNDER UNIFORM CORROSION CONDITION
Wei Baoming Hao Ling Yang Zhongying (Nanjing Institute of Chemical Technology). AN APPROACH TO THE PITTING STEADY GROWTH OF 18-8 AUSTENITIC STAINLESS STEEL UNDER UNIFORM CORROSION CONDITION[J]. Journal of Chinese Society For Corrosion and Protection, 1988, 8(2): 113-119
Authors:Wei Baoming Hao Ling Yang Zhongying (Nanjing Institute of Chemical Technology)
Abstract:The effect of the solution temperature and concentration within pits on pitting growth rate of 18-8 austenitic stainless steel has been studied quantitatively under uniform corrosion condition. The practical polarzation curves (PPC) of the sample was measured in the simulated solutions within the pits. The ideal polarization curves and corrosion current densities were obtained by extrapolating the Tafe's lines of the PPC to corrosion potentials. The requirements for repassivation of pitting nuclei were discussed in detail. According to the experimental results, the authors attempted an initial approach to a method for measuring the practical rate of pitting growth.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《中国腐蚀与防护学报》浏览原始摘要信息
点击此处可从《中国腐蚀与防护学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号