An integrated error compensation method based on on-machine measurement for thin web parts machining |
| |
Affiliation: | 1. Division of Advanced Manufacturing, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China;2. State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University, Beijing 10084, China;3. OpenFiesta, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China |
| |
Abstract: | Thin webs are widely used in the aerospace industry for the advantages of compact structure, light weight and high strength-to-weight ratio. Due to its low rigidity, serious machining error may occur, therefore, Finite Element method and mechanism analysis are usually utilized to modeling its deformation. However, they are very time-consuming and only suitable for elastic deformation error. In this study, an integrated error compensation method is proposed based on on-machine measurement (OMM) inspection and error compensation. The OMM inspection is firstly applied to measure the comprehensive machining errors. The Hampel filtering is then used to eliminate outliers, followed by the triangulation-based cubic interpolation as well as a machine learning algorithm which are used to establish the compensation model. At last, the real time compensation of high-density cutting points is realized by developing the compensation system based on External Machine Zero Point Shift (EMZPS) function of machine tool. Three sets of machining experiment of a typical thin web part are conducted to validate the feasibility and efficiency of the proposed method. Experiment results revealed that after compensation, the comprehensive machining errors were controlled under different machining conditions and 58.1%, 68.4% and 62.6% of the machining error ranges were decreased, respectively. This method demonstrates immense potential for further applications in efficiency and accuracy improvement of thin-walled surface parts. |
| |
Keywords: | On-machine measurement Comprehensive machining error Error compensation Thin web parts |
本文献已被 ScienceDirect 等数据库收录! |
|