Plane kinematic calibration method for industrial robot based on dynamic measurement of double ball bar

A new calibration method is proposed to improve the circular plane kinematic accuracy of industrial robot by using dynamic measurement of double ball bar (DBB). The kinematic model of robot is established by the MDH (Modified Denavit-Hartenberg) method. The error mapping relationship between the motion error of end-effector and the kinematic parameter error of each axis is calculated through the Jacobian iterative method. In order to identify the validity of the MDH parameter errors, distance errors and angle errors of each joint axis were simulated by three orders of magnitude respectively. After multiple iterations, the average value of kinematic error modulus of end-effector was reduced to nanometer range. Experiments were conducted on an industrial robot (EPSON C4 A901) in the working space of 180 mm × 490 mm. Due to the measuring radius of DBB, the working space was divided into 30 sub-planes to measure the roundness error before and after compensation. The average roundness error calibrated by the proposed method at multi-planes decreased about 21.4%, from 0.4637 mm to 0.3644 mm, while the standard deviation of roundness error was reduced from 0.0720 mm to 0.0656 mm. In addition, by comparing the results of positioning error measured by the laser interferometer before and after calibration, the range values of motion errors of end-effector were decreasing by 0.1033 mm and 0.0730 mm on the X and Y axes, respectively.