The effects of hyperbranched poly(siloxysilane)s on conductive polymer aluminum solid electrolytic capacitors |
| |
Authors: | Katsunori Nogami Kiyoshi Sakamoto Teruaki Hayakawa Masa-aki Kakimoto |
| |
Affiliation: | 1. Graduate School of Tokyo Institute Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan;2. Nippon Chemi-Con Co., 185-1, Marunouchi, Yabuki-machi, Nishi-Shirakawa-gun, Fukushima 969-0235, Japan |
| |
Abstract: | An aluminum solid electrolytic capacitor, using poly-(3,4-ethylenedioxythiophene) (PEDOT) as a counter electrode, was prepared with hyperbranched poly(siloxysilane)s (HBPSi) that has a large number of vinyl groups to improve the interfacial properties between aluminum oxide and PEDOT. Capacitance and equivalent series resistance (Rs) were significantly improved compared to untreated oxide film and vinyl terminated polydimethylsiloxane coated interfaces. From electrochemical measurement of the withstand voltage, damage to the oxide film from chemical polymerization of PEDOT was less with the HBPSi treatment. Frequency characteristics and electrical conductivity measurements of the polymer indicated that the resistance inside the etched porous layer was greatly reduced. These results show that the HBPSi pre-coating layer inhibited degradation of the oxide film by chemical polymerization of PEDOT and the conductivity of PEDOT in the etched porous oxide layer, and also enlarges the contact area by improving interfacial adhesion. |
| |
Keywords: | Hyperbranched polymer Poly(3,4-ethylenedioxythiophene) Aluminum electrolytic capacitor |
本文献已被 ScienceDirect 等数据库收录! |
|