Influence of current densities in SOFC and PEFC stacks on a SOFC–PEFC combined system |
| |
| Authors: | M Yokoo K Watanabe M Arakawa Y Yamazaki |
| |
| Affiliation: | 1. NTT Energy and Environment Systems Laboratories, NTT Corporation, 3-1, Morinosato-Wakamiya, Atsugi-shi, Kanagawa 243-0198, Japan;2. Department of Innovative and Engineered Materials, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259, Nagatsuta, Midoriku, Yokohama-shi, Kanagawa 226-8502, Japan |
| |
| Abstract: | A solid oxide fuel cell (SOFC)–polymer electrolyte fuel cell (PEFC) combined system was investigated by numerical simulation. Here, the effect of the current densities in the SOFC and the PEFC stacks on the system's performance is evaluated under a constant fuel utilization condition. It is shown that the SOFC–PEFC system has an optimal combination of current densities, for which the electrical efficiency is highest. The optimal combination exists because the cell voltage in one stack increases and that of the other stack decreases when the current densities are changed. It is clarified that there is an optimal size of the PEFC stack in the parallel-fuel-feeding-type SOFC–PEFC system from the viewpoint of efficiency, although a larger PEFC stack always leads to higher electrical efficiency in the series-fuel-feeding-type SOFC–PEFC system. The 40 kW-class PEFC stack is suitable for the 110 kW-class SOFC stack in the parallel-fuel-feeding type SOFC–PEFC system. |
| |
| Keywords: | Solid oxide fuel cell Polymer electrolyte fuel cell Combined system Steam reforming |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
