首页 | 本学科首页   官方微博 | 高级检索  
     

混凝_MBR工艺处理印染废水试验研究
引用本文:王俊.混凝_MBR工艺处理印染废水试验研究[J].广东化工,2010,37(4):146-148.
作者姓名:王俊
作者单位:中交第二航务工程勘察设计院有限公司,湖北,武汉,430071
摘    要:本试验采用混凝沉淀_MBR工艺对印染废水进行处理。试验研究表明:混凝后COD的去除率达到80%以上,BOD5的去除率达到55%以上,色度的去除率达到84%以上;再经MBR处理,出水COD低于30mg/L,BOD5低于10mg/L,色度低于30度,达到了回用水的标准。

关 键 词:印染废水  混凝沉淀  膜-生物反应器  回用水

A Study of Treatment of Printing and Dyeing Wastewater from Complex Coagulant and Membrane Bioreactor
Wang Jun.A Study of Treatment of Printing and Dyeing Wastewater from Complex Coagulant and Membrane Bioreactor[J].Guangdong Chemical Industry,2010,37(4):146-148.
Authors:Wang Jun
Affiliation:Wang Jun (CCCC Second Harbor Consultants Co., Ltd., Wuhan 430071, China)
Abstract:Complex coagulant and membrane bioreactor is used to treat the printing and dyeing wastewater. The promising experimental results were obtained and showed as following: the removal of COD was higher than 80 % after coagulation, the removal of BOD5 was higher than 55 % after coagulation, the removal of color was higher than 84 % after coagulation. The effluent of coagulation was further treated by a Membrane Bioreactor. The COD of final effluent was below 30 mg/L, the BOD5 of final effluent was below 10 mg/L, the color of final effluent was below 30 degree. The effluent met the need of the standard of the reclaimed water.
Keywords:printing and dycing wastewater  complex coagulant  MBR  reclaimed water
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号