| 粉末冶金法与电弧熔炼法制备TiB2/Cu复合材料 |
| |
| 引用本文： | 吴波,张萌,张剑平,张小明.粉末冶金法与电弧熔炼法制备TiB2/Cu复合材料[J].热加工工艺,2008,37(22). |
| |
| 作者姓名： | 吴波 张萌 张剑平 张小明 |
| |
| 作者单位： | 1. 南昌大学,材料科学与工程学院,江西,南昌,330031
2. 南昌航空大学,材料科学与工程学院,江西,南昌,330063 |
| |
| 基金项目： | 教育部长江学者和创新团队发展计划 |
| |
| 摘 要： | 以Cu、Ti、B_4C合金粉末为原料,分别用粉末冶金法和电弧炉熔炼法制备TiB_2/Cu复合材料,研究了制备工艺、配料比等因素对Cu基中生成相的影响。结果表明:随TiB_2理论生成量增加,粉末冶金法烧结后得到含多种不同的硼化物的铜基复合材料;电弧炉熔炼法则可得到单一的TiB_2增强Cu基复合材料,且致密度、硬度和电导率均高于粉末冶金法制得的试样。
|
| 关 键 词： | 粉末冶金 电弧熔炼 TiB_2/Cu复合材料 原位反应 |
TiB2/Cu Composite Prepared by Powder Metallurgy and Electric Arc Melting |
| |
| WU Bo,ZHANG Meng,ZHANG Jianping,ZHANG Xiaoming.TiB2/Cu Composite Prepared by Powder Metallurgy and Electric Arc Melting[J].Hot Working Technology,2008,37(22). |
| |
| Authors: | WU Bo ZHANG Meng ZHANG Jianping ZHANG Xiaoming |
| |
| Abstract: | Taking Cu,Ti,B_4C mixed alloy powders as raw material,TiB_2/Cu composite was prepared by powder metallurgy and electric arc melting.The effects of preparing process,ingredient ratio on the products in Cu matrix were studied.The results show that:with the increase of TiB_2 in theory,several kinds ofborides in Cu matrix can be got by powder metallurgy,while the single-phase TiB_2 in Cu matrix can be got by electric arc melting.The density,hardness and conductivity of the materials prepared by electric arc melting are higher than those by powder metallurgy. |
| |
| Keywords: | powder metallurgy electric arc melting TiB_2/Cu composite in-situ reaction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
