| 不同聚合釜生产羧基丁苯胶乳的探讨 |
| |
| 引用本文： | 火金三.不同聚合釜生产羧基丁苯胶乳的探讨[J].合成橡胶工业,1996,19(6):345-347. |
| |
| 作者姓名： | 火金三 |
| |
| 作者单位： | 兰州化学工业公司合成橡胶厂 |
| |
| 摘 要： | 考察了１２．７ｍ＾３和１５．０ｍ＾３聚合釜在生产羧基丁苯胶中搅拌功率、搅拌级别、桨叶端速和传热能力以对聚合温度及产品质量的影响。结果表明，在传热能力强，搅拌级别适中的情况下，聚合温度容易控制，产品质量好，转化率较镐，能耗和物耗较低。
|
| 关 键 词： | 羧基丁苯胶乳 聚合釜 搅拌 橡胶胶乳 |
INVESTIGATION ON PRODUCTION OF CARBOXYLATED STYRENE-BUTADIENE RUBBER LATEX IN DIFFERENT POLYMERIZATION REACTORS |
| |
| Huo Jinsan.INVESTIGATION ON PRODUCTION OF CARBOXYLATED STYRENE-BUTADIENE RUBBER LATEX IN DIFFERENT POLYMERIZATION REACTORS[J].China Synthetic Rubber Industry,1996,19(6):345-347. |
| |
| Authors: | Huo Jinsan |
| |
| Affiliation: | Synthetic Rubber Factory of Lanzhou Chemical Industry Cor poration |
| |
| Abstract: | The effects of agitation power, agitation speed, agitation grade and heat transfer ability on polymerization temperature and product quality in the production of carboxylated styrene-butadiene rubber latex in 12.7m3 and 15.0m3 polymerizated reactors were studied.The results showed that the polymerization temperature was easy to control. the product quality was good,the monomer conversionwas higher and the consumptions of energy and materials were lower when the polymerization reactor was in great capacity of heat transfer and in appropriate agitation grade. |
| |
| Keywords: | carboxylated styrene-butadiene rubber latex polymerization reactor agitation |
| 本文献已被 CNKI 维普 等数据库收录！ |
