| 小模数齿轮传动重合度分析 |
| |
| 引用本文： | 王丕增,陈文贤,蒋秀珍. 小模数齿轮传动重合度分析[J]. 哈尔滨工业大学学报, 1987, 0(3) |
| |
| 作者姓名： | 王丕增 陈文贤 蒋秀珍 |
| |
| 作者单位： | 哈尔滨工业大学公差与仪器零件教研室(王丕增，陈文贤)，哈尔滨工业大学公差与仪器零件教研室(蒋秀珍) |
| |
| 摘 要： | 本文分析了小模数渐开线齿轮传动的重合度与节圆压力角的关系,给出了增大重合度的设计方法。
|
| 关 键 词： | 齿轮传动 重合度 渐开线齿轮传动 |
An Analysis of the Contact Ratio of Small Module Gearing |
| |
| Wang Peizeng Chen Wenxian Jang Suzhen. An Analysis of the Contact Ratio of Small Module Gearing[J]. Journal of Harbin Institute of Technology, 1987, 0(3) |
| |
| Authors: | Wang Peizeng Chen Wenxian Jang Suzhen |
| |
| Affiliation: | Wang Peizeng Chen Wenxian Jang Suzhen |
| |
| Abstract: | In this paper, the relation between the contact ratio and the pressure angle of pitch circle for small module involute gearing is analyzed. A design method for ncreasing the contact ratio is also given in the paper. |
| |
| Keywords: | Gear drives Contact ratio Involute gearing |
| 本文献已被 CNKI 等数据库收录！ |
