| 塑料导轨注射模设计 |
| |
| 引用本文： | 徐方龙. 塑料导轨注射模设计[J]. 塑料制造, 2005, 0(10): 42-43 |
| |
| 作者姓名： | 徐方龙 |
| |
| 作者单位： | 阿城继电器股份有股公司,黑龙江阿城150302 |
| |
| 摘 要： | 叙述塑料导轨的成型工艺及注射模结构，对设计过程中的难点进行分析，介绍了解决的途径和对策。
|
| 关 键 词： | 镶件 侧抽芯机构 滑块 注射模设计 塑料导轨 成型工艺 设计过程 模结构 |
Design of the Injection Mould for the Plastic Tramroad |
| |
| Xu Fang-long. Design of the Injection Mould for the Plastic Tramroad[J]. Plastics Manufacture, 2005, 0(10): 42-43 |
| |
| Authors: | Xu Fang-long |
| |
| Affiliation: | Acheng Relay Co.Ltd, Heilongjiang Acheng 150302, China |
| |
| Abstract: | The forming technology for the plastic tramroad and the injection mould structure were introduced. The difficult points in the processing course were analyzed. And the ways and measures to solving those difficult problems were introduced. |
| |
| Keywords: | insert core-pulling mechanism slide |
| 本文献已被 维普 等数据库收录！ |
