| TIG焊接熔池形状参数的视觉检测 |
| |
| 引用本文： | 高进强,武传松.TIG焊接熔池形状参数的视觉检测[J].金属学报,2000,36(12):1284-1288. |
| |
| 作者姓名： | 高进强 武传松 |
| |
| 作者单位： | 山东工业大学连接技术研究所,济南,250061 |
| |
| 基金项目： | 国家自然科学基金资助项目59875053 |
| |
| 摘 要： | 在分析ＴＩＧ焊接电弧光谱的基础上，设计出复合滤光镜头，与普通ＣＣＤ摄像机组成视觉传感器，从试件正面观测熔池图像，焊接过程中根据电流大小通过软件调整采集图像亮度，得到了比较清晰的ＴＩＧ焊接熔池图像，利用自行开发的图像处理算法，检测了熔池正面的形状参数。该算法处理一幅图像同时不超过７０ｍｓ，满足实时检测的需要。
|
| 关 键 词： | 熔池几何参数 视觉检测 图像处理 TIG焊 |
| 文章编号： | 0412-1961(2000)12-1284-05 |
| 修稿时间： | 2000年5月23日 |
VISION-BASED MEASURING OF WELD POOL GEOMETRY IN TIG WELDING |
| |
| GAO Jinqiang,WU Chuansong.VISION-BASED MEASURING OF WELD POOL GEOMETRY IN TIG WELDING[J].Acta Metallurgica Sinica,2000,36(12):1284-1288. |
| |
| Authors: | GAO Jinqiang WU Chuansong |
| |
| Abstract: | Based on the analysis of tungsten-inert-gas (TIG) welding arc spectrum, a composite filter fen has been designed. This fen and a normal CCD camera form a vision sensor which can observe the TIG weld pool from the front side of workpieces. During welding process the captured image brightness is adjusted according to the magnitude of welding current by means of software, and comparatively clear images of TIG weld pool are obtained. The weld pool geometry was measured through the image processing algorithm developed by the authors, which takes less than 70 ms to process a frame of image and meets the requirement of real-time measuring. |
| |
| Keywords: | weld pool geometry vision-based measuring image processing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
