| Ti含量对超低碳氮Cr18不锈钢冷轧板再结晶组织和织构的影响 |
| |
| 引用本文： | 沈继程,何慎,郑宏光,常锷,孙丹,陈伟庆. Ti含量对超低碳氮Cr18不锈钢冷轧板再结晶组织和织构的影响[J]. 上海金属, 2010, 32(1): 30-33 |
| |
| 作者姓名： | 沈继程 何慎 郑宏光 常锷 孙丹 陈伟庆 |
| |
| 作者单位： | 1. 宝钢研究院,上海,201900
2. 北京科技大学冶金与生态工程学院 |
| |
| 摘 要： | 研究含钛量分别为0.22%、0.28%的超低碳氮Cr18不锈钢冷轧板经850℃退火处理后的再结晶组织和再结晶织构,结果表明:含钛0.22%的Cr18不锈钢冷轧板再结晶晶粒尺寸略大于含钛0.28%的Cr18不锈钢冷轧板。含钛0.22%的冷轧板试样在850℃下保温4min时{111}112取向密度强度达到了16.0,而在相同保温时间,含钛0.28%的冷轧板{111}面织构取向密度强度最大只有12.9。
|
| 关 键 词： | Cr18不锈钢 Ti含量 再结晶 织构 |
INFLUENCE OF Ti CONTENT ON RECRYSTALLIZATION MICROSTRUCTURE AND TEXTURE OF Cr18 STAINLESS STEEL WITH ULTRA - LOW CARBON AND NITROGEN |
| |
| Shen Jicheng,He Shen,Zheng Hongguang,Chang E,Sun Dan,Chen Weiqing. INFLUENCE OF Ti CONTENT ON RECRYSTALLIZATION MICROSTRUCTURE AND TEXTURE OF Cr18 STAINLESS STEEL WITH ULTRA - LOW CARBON AND NITROGEN[J]. Shanghai Metals, 2010, 32(1): 30-33 |
| |
| Authors: | Shen Jicheng He Shen Zheng Hongguang Chang E Sun Dan Chen Weiqing |
| |
| Affiliation: | Shen Jicheng~1 He Shen~1 Zheng Hongguang~1 Chang E~1 Sun Dan~2 Chen Weiqing~2 (1.R&D Center,Baoshan Iron , Steel Co.,Ltd.,2.School of Metallurgical , Ecological Engineering,University of Science , Technology,Beijing) |
| |
| Abstract: | |
| |
| Keywords: | Cr18 Stainless Steel Titanium Content Recrystallization Texture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
