首页 | 本学科首页   官方微博 | 高级检索  
     

110 kV单芯电缆金属护套环流计算与试验研究
引用本文:牛海清,王晓兵,蚁泽沛,张尧.110 kV单芯电缆金属护套环流计算与试验研究[J].高电压技术,2005,31(8):15-17.
作者姓名:牛海清  王晓兵  蚁泽沛  张尧
作者单位:华南理工大学电力学院,广州510640;广电集团广州供电输电部,广州510600
摘    要:为研究交联聚乙烯单芯电缆的护套环流,建立了计算单芯电缆金属护套两端互联直接接地以及交叉互联两端接地时环流的数学模型,编写VB程序进行了计算。在实际电缆线路上的试验结果与计算值相差不大,验证了编程计算的正确性。讨论了各种因素对护套环流的影响后提出了串入电阻以有效降低环流的思路。

关 键 词:单芯电缆  金属护套  环流  试验
文章编号:1003-6520(2005)08-0015-03
收稿时间:2005-01-30
修稿时间:2005年1月30日

Study on Circulating Current of 110 kV Single-core Cable
NIU Haiqing,WANG Xiaobing,YI Zepei,ZHANG Yao.Study on Circulating Current of 110 kV Single-core Cable[J].High Voltage Engineering,2005,31(8):15-17.
Authors:NIU Haiqing  WANG Xiaobing  YI Zepei  ZHANG Yao
Affiliation:1(1. Electric power College, South China University of Technology, Guangzhou 510640, China; 2. Power Transmission Department of Guangzhou Power Company, Guangzhou 510310, China)
Abstract:The paper presents a model of calculating so-called circulating current of cable (CCA) consisting of three single-core XLPE cables, of which sheaths are two-end grounded. Taking the induced voltage into consideration, both of sheaths with or without applied cross-bonding connection are discussed here. A programmer is tested for calculating the circulating current, and the result is compared with experimentation to prove the correctness of the calculation. Meanwhile, the influential factors of circulating current are discussed, and a new method to reduce the value is presented.
Keywords:single-core cable  metal sheath  circulating current  experimentation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号