| PA66/GF传动轮中GF分布的工艺分析 |
| |
| 引用本文： | 高云鹏,孙锡红. PA66/GF传动轮中GF分布的工艺分析[J]. 工程塑料应用, 2008, 36(6): 40-42 |
| |
| 作者姓名： | 高云鹏 孙锡红 |
| |
| 作者单位： | 上海理工大学机械工程学院,上海,200093 |
| |
| 摘 要： | 以玻璃纤维增强尼龙66(PA66/GF)发动机传动轮为例,借助Moldflow软件分析了改变浇口位置和制件结构对注塑过程中GF分布的影响。结果表明,采用内部2个浇口的浇注方式可以得到较好的成型制件,其表观质量和力学性能优良。
|
| 关 键 词： | 尼龙66 玻璃纤维 分布 浇口 Moldflow软件 |
| 修稿时间： | 2008-03-18 |
ANALYSIS OF GF DISTRIBUTION IN PA66/GF BAND WHEEL |
| |
| Gao Yunpeng,Sun Xihong. ANALYSIS OF GF DISTRIBUTION IN PA66/GF BAND WHEEL[J]. Engineering Plastics Application, 2008, 36(6): 40-42 |
| |
| Authors: | Gao Yunpeng Sun Xihong |
| |
| Abstract: | With the help of the software Moldflow and taking nylon 66(PA66)/glass fiber(GF)band wheel as an example,the influence of change of gate location or the part structure on GF distribution during the injection molding is analyzed.The results show that reasonable products with good apparent quality and excellent mechanical properties can be obtained when adopting 2 submarine gates. |
| |
| Keywords: | nylon glass fiber distribution gate location Moldflow software |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
