|
|||||
|
|
| 双面受载齿轮弯曲疲劳设计方法研究 | |
| 引用本文： | 王国军,闫清东,蒋美华,陈欣.双面受载齿轮弯曲疲劳设计方法研究[J].机械设计,2006,23(6):10-12. |
| 作者姓名： | 王国军 闫清东 蒋美华 陈欣 |
| 作者单位： | 1. 北京理工大学,机械与车辆工程学院,北京,100081;军事交通学院,汽车系,天津,300161 2. 北京理工大学,机械与车辆工程学院,北京,100081 3. 军事交通学院,汽车系,天津,300161 |
| 摘 要： | 对现行的齿轮弯曲疲劳设计方法进行了研究，发现现行的方法如果采用按GB／T3480-1983齿轮弯曲疲劳实验方法，得出的数据进行齿轮的弯曲疲劳设计，只适用于齿轮单面受栽的情况。为了解决这一问题，从疲劳损伤的基本理论出发，结合GB／T3480—1983齿轮弯曲疲劳实验方法，推导出了求解齿轮双面受栽弯曲疲劳应力的修正方法和相应的计算公式，对原有的方法进行了补充。 |
| 关 键 词： | 齿轮 双面受载 弯曲疲劳 |
| 文章编号： | 1001-2354（2006）06-0010-03 |
| 收稿时间： | 2005-09-22 |
| 修稿时间： | 2005-09-222005-12-29 |
Study on the designing method of bending fatigue in gears those bear loading on both sides |
|
| WANG Guo-jun,YAN Qing-dong,JIANG Mei-hua,CHEN Xin.Study on the designing method of bending fatigue in gears those bear loading on both sides[J].Journal of Machine Design,2006,23(6):10-12. | |
| Authors: | WANG Guo-jun YAN Qing-dong JIANG Mei-hua CHEN Xin |
| Affiliation: | 1. School of Mechanical and Vehicular Engineering, Beijing University of Science and Engineering, Beijing 100081, China; 2, Department of Automobile Engineering, Institute of Military Communication, Tianjin 300161, China |
| Abstract: | A study has been carried out on currently used designing method for bending fatigue in gears, and discovered that if the currently used method adopts data obtained in accordance with GB/T3480-83 test method for bending fatigue in gears to carrying out design of bending fatigue in gears will only be suitable for the condition of gears those bear loading on single side. In order to solve this problem, start from the basic theory of fatigue damage and combining with the GB/T3480-83 test method of bending fatigue in gears, the modification method for finding the stress of bending fatigue in gears those bear loading on both sides and the corresponding calculation formulae were derived, and a supplement has been conducted to the original method. |
| Keywords: | gear bear loading on both sides bending fatigue |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |