|
|||||
|
|
| 优控主轴转速系统极限切削深度 | |
| 引用本文： | 付连宇,卡京比·保尔,王晓军. 优控主轴转速系统极限切削深度[J]. 吉林大学学报(工学版), 2000, 30(1): 83-86 |
| 作者姓名： | 付连宇 卡京比·保尔 王晓军 |
| 作者单位： | 1. 南京航空航天大学,振动工程研究所,江苏,南京,210016 2. 吉林工业大学,机械科学与工程学院,吉林,长春,130025 |
| 摘 要： | 对优控主轴转速系统的极限切削深度进行了试验考证。考证结果表明 :与未控主轴转速系统相比 ,优控主轴转速系统的极限切削深度明显提高 ,利用主轴转速寻优控制方法可以大幅度提高机床的切削效率。 |
| 关 键 词： | 颤振 寻优控制 主轴转速 极限切深 切削效率 |
| 收稿时间： | 1999-05-20 |
| 修稿时间： | ：1999-05- |
Experimental Study On Limit Cutting Depth by Optimal Cont rolling Spindle Speed |
|
| FU Lian-yu,Kajimbi J Paul,WANG Xiao-jun. Experimental Study On Limit Cutting Depth by Optimal Cont rolling Spindle Speed[J]. Journal of Jilin University:Eng and Technol Ed, 2000, 30(1): 83-86 | |
| Authors: | FU Lian-yu Kajimbi J Paul WANG Xiao-jun |
| Affiliation: | 1. Institute of Vibration Engineering, Nanjing University of Aeronautics and Astronautics, Nangjing 210016, China; 2. College of Mechanical Science and Engineering, Jilin University of Technology, Changchun 130025, China |
| Abstract: | The limit cutting depth of the machining system with optimal controlling spindle speed is studied by experiments.The experimental set up and the experimental method are introduced.The results show that the limit cutting depth of the machining system with optimal controlling spindle speed is improved more greatly than that of uncontrolled system and the cutting efficiency of the machine tool can be improved on a large scale by spindle speed optimal control. |
| Keywords: | chatter optimal control spindle speed limit cutting depth cutting efficiency |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《吉林大学学报(工学版)》浏览原始摘要信息 | |
| 点击此处可从《吉林大学学报(工学版)》下载全文 | |