首页 | 本学科首页   官方微博 | 高级检索  
     

ONP/OMG脱墨生产线脱墨效率的分析
引用本文:Altaf H Basta,詹怀宇,王双飞,黄崇杏,刘道恒,肖萍,陈嘉翔.ONP/OMG脱墨生产线脱墨效率的分析[J].中国造纸,2002,21(4):13-19.
作者姓名:Altaf H Basta  詹怀宇  王双飞  黄崇杏  刘道恒  肖萍  陈嘉翔
作者单位:1. 华南理工大学制浆造纸工程国家重点实验室,广州,510640
2. 广西大学造纸科学研究所,南宁,530004
摘    要:介绍了脱墨浆中总油墨粒子浓度、残留油墨粒子浓度和原浆油墨粒子浓度的测量方法,并测定了广州造纸有限公司80t/d和250t/d的ONP/OMG脱墨生产组各主要部位脱墨浆的上述油墨粒子浓度。首次提出理论脱墨效率和实际脱墨率的概念,并推荐作为评价脱墨生产线脱墨效率的方法。根据广纸油墨粒子浓度测定的数据,计算出该厂80t/d和250t/d脱墨生产线各阶段的理论脱墨效率和实际脱墨率,结果表明:不同碎解机、浮选机和精选机的筛缝宽度对理论脱墨效率和实际脱墨率的影响很大。

关 键 词:脱墨生产线  脱墨浆  理论脱墨效率  实际脱墨率  油墨粒子分布  造纸
文章编号:0254-508X(2002)04-0013-07
修稿时间:2001年10月30

Deinking Efficiency of an ONP/OMG Deinking Line
Altaf H Basta.Deinking Efficiency of an ONP/OMG Deinking Line[J].China Pulp & Paper,2002,21(4):13-19.
Authors:Altaf H Basta
Abstract:The methods for determination of the concentration of total ink,residual ink and original pulp ink were introduced.The ink concentrations of deinked pulps from different parts of the80t/d and250t/d ONP/OMG deinking lines in Guangzhou Paper Mill were determined.As a recommended method for evaluation of the deinking processes,the theoretical deinking efficiency and actual deinking rate at different stage of both deinking lines in Guangzhou Paper Mill were calculated and then evaluated the deinking processes.The results showed that the effects of different repulper,flotation cell and the slot width of fine screen were very important on the theoretical deinking efficiency and actual deinking rate.
Keywords:ONP/OMG  deinking efficiency  Guangzhou Paper Mill
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号