| 压水堆嬗变长寿命裂变产物的弹棒事故安全性研究 |
| |
| 引用本文： | 马云帆,吴宏春,曹良志.压水堆嬗变长寿命裂变产物的弹棒事故安全性研究[J].原子能科学技术,2017,51(3):439-443. |
| |
| 作者姓名： | 马云帆 吴宏春 曹良志 |
| |
| 作者单位： | 西安交通大学 核科学与技术学院，陕西 西安710049 |
| |
| 基金项目： | 国家自然科学基金资助项目(11522544) |
| |
| 摘 要： | 为分析压水堆(PWR)嬗变长寿命裂变产物(LLFP)的堆芯瞬态安全性,基于CASMO-4、RSIM以及改进的NLSANMT/COBRA-4程序搭建了程序系统,并利用该系统研究了嬗变堆芯在弹棒事故下的安全特性,分析了寿期初和寿期末事故发生后的功率变化及燃料中心温度变化。数值结果表明:与参考PWR相比,装载99 Tc将会使温度系数变得更负,因此弹棒事故下峰值功率降低,而装载129I则相反;装载这两种裂变产物时,燃料中心温度最高可升高127~157℃,仍距UO2芯块熔化限值温度有较大裕量。
|
| 关 键 词： | 瞬态 压水堆 嬗变 长寿命裂变产物 |
Study of Rod Ejection Accident Safety of PWR for Long-lived Fission Product Transmutation |
| |
| M A Yun-fan,WU Hong-chun,CAO Liang-zhi.Study of Rod Ejection Accident Safety of PWR for Long-lived Fission Product Transmutation[J].Atomic Energy Science and Technology,2017,51(3):439-443. |
| |
| Authors: | M A Yun-fan WU Hong-chun CAO Liang-zhi |
| |
| Affiliation: | School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China |
| |
| Abstract: | In order to carry out transient safety analysis of PWR cores used for long-lived fission product (LLFP) transmutation ,a code system was developed based on CASMO-4 ,RSIM and modified NLSANMT/COBRA-4 .Using this system ,the safety feature of LLFP transmuting PWR in rod ejection accidents was studied and the power evolution and maximum fuel center temperature variation were analyzed at both BOL and EOL .The numerical results show that loading 99 Tc leads to lower peaking power because of more negative moderator temperature coefficient ,w hile loading 129 I results in higher peaking power .Also ,loading 99 Tc and 129 I will make fuel center temperature rise up about 127-157 ℃ ,which is still within the melting point of UO2 fuel . |
| |
| Keywords: | transient PWR transmutation long-lived fission product |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《原子能科学技术》浏览原始摘要信息 |
|
点击此处可从《原子能科学技术》下载全文 |
|
