| 高强、高模、超粗旦聚乙烯醇（PVA）纤维的研制 |
| |
| 引用本文： | 王志鑫,汤惠工,何唯平,倪建华,王依民.高强、高模、超粗旦聚乙烯醇（PVA）纤维的研制[J].中国材料科技与设备,2007,4(3):81-83. |
| |
| 作者姓名： | 王志鑫 汤惠工 何唯平 倪建华 王依民 |
| |
| 作者单位： | [1]深圳海川实业有限公司,广东深圳508400 [2]东华大学材料科学与工程学院,上海200051 |
| |
| 基金项目： | 深圳海川实业有限公司资助项目 |
| |
| 摘 要： | 本文介绍了应用凝胶纺丝技术制备用于混凝土增强，力学性能很好的PVA粗旦纤维。研究了凝固浴温度、萃取条件和拉伸条件等对纤维结构和力学性能的影响，结果表明，凝胶纤维的性能与纺丝和拉伸工艺等有较大的关系。
|
| 关 键 词： | 聚乙烯醇 凝胶纺丝 高强高模 粗旦纤维 |
Preparation of High Strength, High Modulus PVA Fiber With Super Thickness |
| |
| WANG Zhi-xin , TANG Hui-gong , HE Wei-ping , NI Jian-hua , WANG Yi-min.Preparation of High Strength, High Modulus PVA Fiber With Super Thickness[J].Chinese Materials Science Technology & Equipment,2007,4(3):81-83. |
| |
| Authors: | WANG Zhi-xin TANG Hui-gong HE Wei-ping NI Jian-hua WANG Yi-min |
| |
| Affiliation: | 1. Shenzhen Oceanpower Co., ltd, Guangdong, Shenzhen, 508400, China ; 2. The College of Material Science and Engineering, Donghua University, Shanghai, 200051 ,China |
| |
| Abstract: | High strength, high modulus and super thick PVA monofilament was prepared by gel spinning technique. The influences of the temperature of coagulation bath, extraction and drawing conditions on resulted fiber mechanical properties were studied and the fiber was characterized by X-ray diffractometer. The results show that the properties of gel-spun fibers were related to the spinning and drawing conditions. |
| |
| Keywords: | PVA gel-spinning High strength and high modulus Super thick fiber |
| 本文献已被 维普 等数据库收录！ |
|
