Determination of the combined heat transfer coefficient to simulate the fire-induced damage of a concrete tunnel lining under a severe fire condition

To avoid underestimating the severity of damage to tunnel concrete lining under the high-temperature conditions of a fire using thermal analysis, it is important to consider the cross-sectional loss of a concrete lining during heating. This study simulates the structural loss by numerical analysis using an element elimination model and a combined heat transfer coefficient. A series of fire tests was performed with fire curves that differed in the initial temperature gradient and maximum temperature. Values of the optimized combined heat transfer coefficient were obtained from the coincidence of the results of the numerical analysis with experimental data. The results reveal that an increase in both the initial temperature gradient and maximum temperature causes greater damage to the concrete structures and also gives rise to an increase in the combined heat transfer coefficient. Values of the combined heat transfer coefficient can be inferred from values of initial temperature gradient and maximum temperature in the case of structural concrete loss. Two sets of regression equations were derived from the results depending on whether or not a structural loss occurs. The proposed method of thermal analysis outperforms the conventional method in terms of accurately simulating observed results.