首页 | 本学科首页   官方微博 | 高级检索  
     

PR.M高模量沥青混合料性能试验研究
引用本文:杨海,魏为成. PR.M高模量沥青混合料性能试验研究[J]. 石油沥青, 2011, 25(6): 40-45
作者姓名:杨海  魏为成
作者单位:1. 重庆市交通委员会,重庆,400060
2. 招商局重庆交通科研设计院有限公司,重庆,400067
摘    要:采用PR.M制备了高模量沥青混合料,并与添加聚酯纤雏的沥青混合料作对比分析。通过一系列室内试验,较为全面地分析了高模量沥青混合料的综合路用性能。结果表明,PR.M添加剂不仅可以大幅度提高沥青混合料的动态模量,改善其高温性能,也能够明显提高其抗水损害性能和低温抗裂性能,但抗疲劳性能有所下降。本研究成果可为PR.M高模量沥青混合在国内的推广应用提供参考依据。

关 键 词:高模量沥青混合料  PR.M添加剂  聚酯纤维  动态模量

Experimental Study on Performance of High Modulus Asphalt Mixture with PR.M
Yang Hai,Wei Weicheng. Experimental Study on Performance of High Modulus Asphalt Mixture with PR.M[J]. Petroleum Asphalt, 2011, 25(6): 40-45
Authors:Yang Hai  Wei Weicheng
Affiliation:Yang Hai~1,Wei Weicheng~2 (1.Chongqing Communication Committee,Chongqing 400060,2.China Merchants Chongqing Communications Research & Design Institute Co.,Ltd.,Chongqing 400067)
Abstract:High modulus asphalt mixture was prepared with PR.M additive,and was compared with the asphalt mixture added with polyester fibers.The comprehensive road performance of high modulus asphalt mixture was analyzed through a set of laboratory experiments.Results showed that PR.M additive could not only improve the dynamic modulus and the high temperature performance of asphalt mixtures greatly,but also significantly modify the water damage and the crack resistance ability;however,it weakens the fatigue resistan...
Keywords:high modulus asphalt mixture  PR.M additive  polyester fiber  dynamic modulus  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号