首页 | 本学科首页   官方微博 | 高级检索  
     

锚贴钢板加固RC锈蚀梁承载力计算方法与试验研究
引用本文:张建仁, 唐皇, 彭建新, 李炬. 锚贴钢板加固RC锈蚀梁承载力计算方法与试验研究[J]. 工程力学, 2015, 32(3): 97-103. DOI: 10.6052/j.issn.1000-4750.2013.09.0862
作者姓名:张建仁  唐皇  彭建新  李炬
作者单位:长沙理工大学土木与建筑学院,湖南,长沙 410114
基金项目:国家重点基础研究发展计划项目(2015CB057706); 国家自然科学基金项目(51178060); 交通运输部主干学科应用基础研究项目(2014319825160); 中国博士后科学基金项目(2014M552127); 2014长沙理工大学科技创新校重点项目(CX2014ZD01); 长沙理工大学桥梁工程湖南省高校重点实验室开放基金项目(13KA04)
摘    要:基于桁架理论模型,定量考虑锈蚀钢筋力学性能、加固钢板厚度、粘胶层粘结强度、保护层厚度对承载力的影响,建立了RC梁锈蚀锚贴加固后极限承载力的计算公式。通过对9片锚贴钢板加固锈蚀梁、3片锈蚀梁以及3片不锈蚀加固梁的试验研究,验证了理论模型的正确性。试验研究和公式计算表明在锈蚀率接近和保护层厚度相同的情况下,钢板厚度每提高1mm,承载力大小提高15kN~20kN,在锈蚀率大小不同的情况下,锈蚀率增加2%~3%,承载力降低大约10kN。

关 键 词:RC梁  锈蚀  锚贴钢板加固  承载力  计算方法  试验研究
收稿时间:2013-09-16

CACULATION METHOD AND EXPERIMENTAL STUDY ON CORRODED RC BEAMS STRENTHENED BY STEEL PLANT ANCHORED WITH STUD
ZHANG Jian-ren, TANG Huang, PENG Jian-xin, LI Ju. CACULATION METHOD AND EXPERIMENTAL STUDY ON CORRODED RC BEAMS STRENTHENED BY STEEL PLANT ANCHORED WITH STUD[J]. Engineering Mechanics, 2015, 32(3): 97-103. DOI: 10.6052/j.issn.1000-4750.2013.09.0862
Authors:ZHANG Jian-ren  TANG Huang  PENG Jian-xin  LI Ju
Affiliation:School of Civil Engineering and Architecture, Changsha University of Science & Technology, Changsha, Hunan 410114, China
Abstract:Based on the model of truss theory, taking the influence of the mechanical behavior of corroded reinforcements, the thickness of a steel plate, the bond strength, and the thickness of a cover on the capacity of beams into accounts quantitatively, a calculation method for the ultimate load-carrying capacity of corroded RC beams strengthened by steel plates anchored with studs is proposed. The theory model is verified by conducting tests on 9 RC beams strengthened by steel plates anchored with studs, and by 3 corroded RC beams and 3 strengthened RC beams without corroded reinforcements. Experimental results and theoretical results show that a 1mm increase in the thickness of a steel plate will result in 15kN~20kN increase in bearing capacity under same cover thickness and a close corrosion rate, and under the situation of different corrosion rates, an increase in the corrosion rate of 2%~3% of results will cause a decrease in bearing capacity about 10kN.
Keywords:RC beam  corrosion  strengthened by steel plate anchored with studs  bearing capacity  calculating method  experimental research
本文献已被 CNKI 等数据库收录!
点击此处可从《工程力学》浏览原始摘要信息
点击此处可从《工程力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号