| PCD刀具高速铣削SiCp／Al复合材料的表面粗糙度研究 |
| |
| 引用本文： | 许立福,于晓琳,周家林,周丽,黄树涛.PCD刀具高速铣削SiCp／Al复合材料的表面粗糙度研究[J].沈阳理工大学学报,2009,28(1):41-43. |
| |
| 作者姓名： | 许立福 于晓琳 周家林 周丽 黄树涛 |
| |
| 作者单位： | 沈阳理工大学,机械工程学院,辽宁,沈阳,110168 |
| |
| 摘 要： | 通过切削实验，研究PCD刀具铣削SiC颗粒尺寸较大、体积比含量较高的SiCp／Al复合材料时，切削速度、每齿进给量、切削深度对已加工表面粗糙度的影响，根据对实验结果分析得出切削用量对已加工表面粗糙度的影响规律．
|
| 关 键 词： | 表面粗糙度 PCD刀具 SiCp/Al复合材料 |
A Study on the Surface Roughness for High Speed Milling SiCp/Al-matrix Composite Using PCD Tools |
| |
| XU Li-fu,YU Xiao-lin,ZHOU Jia-lin.A Study on the Surface Roughness for High Speed Milling SiCp/Al-matrix Composite Using PCD Tools[J].Transactions of Shenyang Ligong University,2009,28(1):41-43. |
| |
| Authors: | XU Li-fu YU Xiao-lin ZHOU Jia-lin |
| |
| Affiliation: | Shenyang Ligong University;Shenyang 110168;China |
| |
| Abstract: | In the paper,the influence of cutting speed,feed speed and cutting depth on the roughness of machined surface is studied when using the PCD cutting tools for milling SiCp / Al-matrix composite of SiC granule bigger and higher on volume radio.The influence rule of surface roughness of the machined surface with cutting parameter change is obtained by analyzing the experimental data. |
| |
| Keywords: | surface roughness PCD cutting tools SiCp/Al matrix composite |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
